peace and blessings be upon you! welcome to a new wall design tutorial! today we’ll create an easy 3d wall design; it is suitable for bed rooms as a bed background! the wall is painted with a bright color; this is a bright grey color that i used to paint the wall before using the marker, draw the lines with a chalk! or use a pencil! to avoid making any mistakes! draw a big heart figure at the middle of the wall! a sketch of a heart! this is it as you can see! now determine a random point inside the heart figure! as you can see i draw the sketch of the shape with chalk first. i do that to avoid mistakes, you should also do it! at this point; at one side of the heart figure! now bring a straight stick or a ruler! use any available object! and start drawing straight lines! connect the lines to the center point! start…. drawing lines! draw these lines randomly without taking measurements! just randomly! and make the suitable spacing! as you can see, i finished adding all the lines. now bring a masking tape! we’ll start adding colors! as you see, some lines are out of the heart figure, and other lines are at the inside of the figure! we’ll start adding colors out of the figure! we’ll color this area only! for instance, use the tape to define the area where the color goes! this way! I’ll color this area! this is a dark red color! it’s suitable for bed rooms! this is why I’ll use it! color the area defined by the tape! you can define the shape of the heart! as you can see, after adding color to the first cell, leave the next one uncolored! paint this one and leave this one! add color to this one! define it with the tape this way! after I’ve finished painting the outer side of the heart, the heart figure started to pop up. now, we’ll paint the inner side! but first there is an important note to bear in mind! these cone shapes we created are an even number shapes! it must be an even number of cells! if you created an odd number of cells, you must add another cell! let’s count the shapes, this is 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ! these are 14 shapes, if 13 it would be wrong! you will end up with two adjacent red shapes, or grey shapes! this means the shape is ruined! so be careful and keep that in mind! as you can see, the paint needs another coat! so, apply as many coats as necessary until you feel satisfied with the result! I’ll add another coat of paint. then we complete coloring the shape! after applying another coat of paint remove the tape! after I’ve removed the tape, we’ll paint the inner side of the heart figure! don’t paint the opposite cells to the outer ones! and paint the cell next to it! define it with the tape! ans use the same paint to color it! after painting a cell, remove the tape and define another cell with the tape! and add color to it! repeat the same steps to finish the whole shape! this is the final result of our design; a nice 3d design created with simple tools you can do it yourself! if you like the idea, like the video, share, subscribe and hit the bell! see you in another tutorial! peace be upon you!