Desmontar el panel interior de la puerta del coche

Desmontar el panel interior de la puerta del coche


I will show you how to disassemble the panel
inside the driver’s door We will basically use three heads
Two of them torx. We remove that beautify or leverage and we go
removing the screws. You have to remove that screw. This carries a pair of staples.
down here … let’s leverage and then here in the center This head is a T25. That of
Speaker is a T20. in the following link that appears now
I explain in more detail how disassemble the speakers and measurements
that have. Remember to remove this as well
the door has one there another up there … we will have to remove the
railing too this one has the same torx head that
the one with the handle. and the door is fastened with some
staples If one breaks, nothing happens. I had
luck and not broke any. I’m going taking the door like this
and we will climb it up. staples cost very little money
I will leave a link in the description We can only pull here, okay? I already
I have hanging … as you see some staples there and there it goes right there and there … is what I have to throw … ok?
We have to remove now these two wires …
this is the courtesy door light I have it here with my hand. Better take out the
cables removing the keypad … that’s more comfortable, if you liked subscribe and give
a like


Leave a Reply

Your email address will not be published. Required fields are marked *