DIY Painting Tile – Look of Textured Stone| Easy and Fast!

DIY Painting Tile – Look of Textured Stone| Easy and Fast!


Do you have some outdated and
unattractive tile in your home, don’t have a lot of time, don’t have a lot in
the budget and you’re looking for a really easy DIY project? I’m Jennifer
Davenport with Jennifer Decorates, stay tuned, I’m going to show you how you can
take some really ugly tile and turn it into something absolutely gorgeous! I’m in my guest bathroom and before I
get started telling you about this project let me show you a quick before
and after photo of the tile. Before we get started, let me tell you a little bit
of a background on this project. We moved into our house about a year ago and the
guest bathroom tile was in excellent condition. There were no chips in the
tile, no chips in the grout, but I just didn’t like the tile, it wasn’t gonna go
with my style. I had seen on Pinterest where people were stenciling the floor
and that’s what I jumped into- did not go well. I don’t know if it was the size of
the tile and the stencil I was using or I just wasn’t any good at it, so
when I went to start over actually the third time I came up with this idea. So
basically, you’re going to use four products, you’re going to use a primer,
you’re going to use chalk paint, you’re going to use some latex paint and then,
you’re going to use a polyurethane sealer. For tools, you just need a
paintbrush and a sander. This project will go so quickly and you will
absolutely love the results. Step 1: you want to clean your floor. Make sure
there’s no hair and dust on the floor anywhere and you can take painters tape
and go ahead and tape off the trim. Then you’re going to apply that primer, I
applied it with a roller and then I used a brush up against the trim. You want to
apply two coats and make sure you allow the proper drying time in between coats. Step two: you’re going to apply the chalk paint. I used rust-oleum in the color
charcoal and I will link everything I used in the description but I did two
coats of that, let that thoroughly dry, then I just applied an off-white latex
paint color, it was actually some color I had and I applied two coats of that, as
well, giving me a lot of drawing time in between coats.
Step three: is to paint your grout. Now, I chose a lighter gray and I just used a
simple paintbrush and I painted every bit of the grout. Now, the reason I
painted the grout first is because if I got a little bit of that lighter grey
onto the tile it wasn’t that big of a deal because I knew I was going to be
sanding that tile and so I didn’t have to worry about being particularly
perfect. This is actually the really fun part. Now, I used a sander and what I did
I began sanding on each tile on the edges. My tiles were square so I took the
sander and I I just sanded one edge, two edge, three edge, four edges then I took
the sander and swept across the tile in a few motions. This brought out the gray
color and the white color of the paint, it made this tile look like Old World
Tile and it was so quick, I did the entire floor in less than an hour! Now
tip: If you start out and you’ve done a few tiles and you realized you used the
sander too much, I’m pointing that out because that’s what I did, so I stopped
sanding and I immediately kind of painted that over and let it dry and
then I knew to be a little bit easier on the sander after I did the edges. For the
last step, you want to make sure you have vacuumed and swept every bit of the dust,
which you’ve created quite a bit of dust sanding, get that all cleaned up and
you’re ready for the last step which is adding the polyurethane which is your
top coat. Again, two coats of that, let it dry in between. Well, I can tell you I am utterly
thrilled with this project and we’ve had this floor done for over a month, it’s
holding up beautifully. Again, it just looks like Old World Tile that I paid a
lot of money for and I didn’t and it was an easy project. Well, I hope you enjoyed
this video, be sure to leave me a comment below, tell me, maybe you’ve done
something with tile that’s a whole different technique, I’d love to know
about it. Be sure to subscribe to my channel, make sure you hit that bell
because it’s gonna tell you when I have a new video out! Have a wonderful day!


33 thoughts on “DIY Painting Tile – Look of Textured Stone| Easy and Fast!

  1. Fabulous!!! That’s the greatest primer ever! I have tried many primers, and that one is the best! Great job on the floor!!!

  2. TFS! Amazing! I haven’t caught your videos in a while (my bell was off). I’m glad I didn’t miss this! I’m going to research to see how this technique will work on slate. I’ve grown out & tired of 70’s style! Haha 👍👍👍☮️❤️

  3. Wow that really turned out nice! Now I’m staring at my laundry room floor wondering if it needs some paint !

  4. Hi Jennifer! Your floor turned out gorgeous! I really want to try this in my bathroom! How long do you think it will stay looking marvelous? Thank you so much for the video! Hugs, Kim🤗🤗💕💕

  5. Yes Darling! Just got the paint for 2 bathrooms. Your tips are priceless! 😍😍😍😍😍😍😍😍😍

  6. Great idea. Floor looks great. Love watching your videos! Look forward to seeing your next video. 😊😊❤

  7. Hi Jennifer! That was awesome! I did something similar on a kitchen backsplash, but I didn't sand mine. I wish I had seen this vid earlier. Tfs!

  8. Absolutely love it. Your floor looks gorgeous!! Thank you so much for sharing how you accomplished this look!! ❤️

  9. What a great idea!! And what an awesome way to save a TON of money! Thanks Jennifer!

  10. Jennifer beautiful as all your projects are! I love your honesty! It is so refreshing to hear you say you messed up! That humility is so honest. Keep up the videos I love them and have watched them all.

Leave a Reply

Your email address will not be published. Required fields are marked *