HOUSE DESIGN (PART-2)

HOUSE DESIGN (PART-2)


So, the next is i have to make my 3BHK Layout TYPE 3, and i have to make this layout on the very same lines that we have followed for that 2BHK and 3BHK Layouts. So, let’s get started. So, that’s my 3BHK layout TYPE 3 and now , the next thing would be I need to provide balconies which will be 1200mm wide. So, let’s provide balconies. Let’s start from this 3BHK layout. So, here we have common balcony for this Master Bedroom. and bedroom no.3. And than by using P EDIT command i am going to join all these three lines. Make an offset of 230mm to the outward side. Okay. The clear dimension is going to be 1.2 mts. I think 150mm is fine. So, offset it by 150mm and, this is my railing on this base wall . And the similar way you have to provide balconies to all other required spaces where you have to provide the balcony. So, these are my balconies for this entire project. This is my lift. You need to see this symbol as well. So, put a cross over here. Match it. And apart from providing the balconies, you also need to provide over here railing for this staircase. Make an offset of 230mm Match it. And provide the railing on top of this base wall. Make an offset of 25mm from both the sides because my railing thickness is 50mm. So that’s my railing for this mid landing. Make an offset of 500 mm and trim these lines and make a wall over here and do the same on other side as well. So, in this way, we have constructed this floor plan of this particular residential project. And in my upcoming videos I’ll be telling you about how to make Stilt Plan, Placing the columns Placing the Furniture as well. So, please keep watching .THANK YOU…!!!


Leave a Reply

Your email address will not be published. Required fields are marked *