Interior Painting: Tools & Techniques

Interior Painting: Tools & Techniques

Today on Repairs101 ñ today on Repairs101
Iíve just finished painting this room and Iíll take you back in time and show you some
of the tools and some of the tricks to get a professional job done quick and easy. Now
donít worry Iím not going to bore you with a lot of footage of me painting but Iíll
just show you some of the things that you can do to do it yourself at home and save
yourself some money. Most of the tools youíre going to need to
do pretty much any home paint job right here, youíve got frames and roller sponges, paint
trays, brushes, some acetone, spackle and some putty knives, a variety of scrapers.
Here weíve got a couple of handle extensions to show you. Got this great little hammer,
a cold chisel, a caulking gun and a couple of tubes of caulk to do around the windows
and stuff, grab some drop sheets, make sure youíve got some newspaper handy. The old
bucket that I keep it all in and over there in the corner ñ just a great tool all around
ñ the two step stepladder. That one Iíve had for about twenty years and except for
the stains and a bit of spackle on the sides of it itís just as good as the day I bought
it. So Iíve got a screwdriver ñ not for opening
the paint cans of course but just for taking the fixture covers off the walls. Iíve got
a paint can opener ñ OK now I just wanted to show you the difference between a good
paint can opener and a great one. Now a good paint can opener is specially designed, it
has this little hook on the end of it thatís specially designed to get in under the lip.
A great paint can opener is designed to open beer bottles as well. And if youíre going
to want your friends to help, Iíll tell you: youíre going to need beer.
So what I wanted to show you about the brushes ñ quite seriously two bucks for this one,
this one was only ninety-nine cents ñ is the size of the bristle mass. This one with
the longer handle and the longer bristles ñ cut on an angle ñ thatís going to be
my brush of choice, alright. Now if youíre a great painter, which Iím not, youíll be
able to keep it clean from that point up and never get any paint into the binding part,
here, because thatís very, very difficult if not impossible to clean out. Pro painters,
youíll see on their brushes that theyíre clean, theyíre only stained from this point
down and itís quite a remarkable skill if you ask me, I donít know how they do it.
Now the reason I suggest that you get something with a larger bristle mass like this one on
the left is going to pick up a lot more paint. Now a professional painter curses every time
he has to bend over to get some more paint. And he or she is going to picking up as much
paint as possible with as big as brush as possible. And I have seen people working with
four inch brushes and I find it just amazing that they can control the paint so easily
but again: practice makes perfect. So for rollers and frames, you know, I have
got quite a few. This little fellow is just terrific for reaching in behind the toilet
or something like that if you are doing a bathroom. And as far as the roller sponges
go, I just buy these nice cushy ones for the fact that they pick up the most paint and
go the furthest because I donít spray on. Again professionals, two guys one will spray
and the other will roll right behind him and do an amazing job in the matter of minutes.
Itís all in the prep work really ñ itís all about getting the furniture out, getting
the paper down, and getting tape on what needs to be taped. This old fashioned system is
cheap and effective. I have chosen CIL acrylic latex paint. Your paint really should be shaken
up at the paint store for you. I got this paint at Wal-Mart for only nineteen dollars
for a gallon, which I find an exceptionally good price. Start stirring and donít stop
stirring until it is all blended. All right, itís starting to look really good. Find the
centre point where you going to be pouring ñ thereís the handle so just go perpendicular
and find the centre. Use a small cold chisel like this one and just cut through a drainage
hole. Thereís the paint dripping into the paint
can and where it came from ñ through that drainage hole I cut with that cold chisel.
Keep it quick and effective, its roll, cut, roll. Ok thatís all you need to know, roll,
cut, roll. That is usually all you need if you are just doing one colour over itself
or white over white, just go for roll cut roll and youíre done.
Ok so as far as cutting goes. And you just want to go cut everywhere where you couldnít
get the roller and then, of course, the next pass with the roller – everything is forgiven.
All of your brush marks will disappear underneath the fresh roller marks.
Now I have worked with some professional guys and seen them cut and I got to tell you, it
just blows me away, the speed at which some guys learn to get going. They pick up as much
paint as possible. They are much braver than I am. They use four inch brushes. This is
only a 2 inch brush. They get in there and move fast. I have worked with guys who would
just paint circles around me, quite literally. Ok with just some hot water in the sink, this
cleaned up really well, eh? Alright, that was a long hard day and I got
two coats down. Anyway the professionals Iíve worked with have all said that if you are
not going to bother doing two coats, well just donít bother doing even one. So two
coats and Iím out.

11 thoughts on “Interior Painting: Tools & Techniques

  1. if you are going to paint with a roller don't use a tray, a 5gal bucket and a bucket screen is what pros use.

Leave a Reply

Your email address will not be published. Required fields are marked *