preparing 2d object references for house design in freeCAD : tutorial part.2

preparing 2d object references for house design in freeCAD : tutorial part.2


and we will do it in the next tutorial alhamdulillah we were created 3 tutorial before but there are some questions that need to be an answer so we change the tutorials order on this tutorial we try to explain how to prepare your 2d object reference just like doors and windows there are many kinds of object reference that we will be built and this tutorial is one of them ok in the case of us, we actually already have some of the object references because in the freeCAD the software is not as easy as common software in architecture like AutoCAD, 3ds max, and others in this software when you dealing with a project you need to already have a reference that creates before that helps us to build more fastest workflow and in the case of us, we actually already have some of the object references this library is not templated of freeCAD, but what’s that we have done before in the previous project in this folder we were create objects reference that will help us in the drawing process this all we have done before this electrical file for example we already have a notations it was created before so when we create an electrical drawing we can use some of them to complete our drawing oke, we start our tutorial how to preparing doors and windows drawing for project reference so we can use some of them to complete our all next drawing it’s actually so easy to create it in default freeCAD, is in the arch mode you can set-up this when you open a new file you want it in default position or draft, drawing or others or part design in our case we were set-up our freeCAD mode in part design so when we start the project the part design interface would be the appears the icon of the tools it’s actually also in the customize mode it’s not a default setup of part design mode there is a tutorial for “how to customize your freeCAD interface”, just browsing in this channel oke to create a door in freeCAD as a reference it’s so simple, we use the sketch there is two sketch here, click this one what the difference? I don’t really know what’s the difference is buts it’s original from part design tools stand alone, not with other tools we click the sketch choose XY plane and press oke and then create rectangle as a basic door and give dimension make it connect to reference point why we do this? it’s for every time we add new lines our object always on the center of workplace not go everywhere that make us slower in modeling oke we edit the sketch double click to edit sketch copy create a support line the support line when we have done the sketch the line is hidden the support line is actually helping us to form the drawing the next idea is how to create the door hole equal with the door automatically every time we change the door dimension leaf door also changes, for example the length of the door its also changes ups, there are some problems


Leave a Reply

Your email address will not be published. Required fields are marked *