Rusty Deadlocked Vise – Perfect Restoration

100 thoughts on “Rusty Deadlocked Vise – Perfect Restoration

  1. Gressel still makes the same vice today and many more. If you use the code "mymechanics" you get 10% off. They deliver world wide. If you're located not in switzerland, order with e-mail and mention the code

  2. Were you using actual sand when you blasted the parts? Because there are a lot more media choices out there that are better and safer than sand.

  3. You should indicate the price of the device purchased new and how much work you have used to restore it. Only then can we make a judgment!

  4. Посмотрел до это другие реставрации, те тиски были действительно восстановлены, для мощной работы, а вот эти честно говоря даже жалко использовать)))больше как музейный экспонат. )))

  5. Капец у меня даже аппетит поднялся с чего так а за труд лайк жмяк вяк

  6. This vide has restored my faith in humanity.. at almost 21 million hits it is more popular than Byoncee or Rita Ora ( Girls you need to catch up with more thought over material ) It does not get much more tranqulizing than this , still more interesting that the two aforementioned talents

  7. I hope those pushing unlike on this video get their fingers in this old perfect restordre vice- who are these plp ,wtf

  8. I don't think I need music some people just so critical the restorations made sounds original processed.

  9. Now I understand why some of these vises costing in the 100s of dollars per vise. So much metal and time wasted on each piece.

  10. Damn straight I SUBSCRIBED. That was a great journey captured on film. So cool to see the whole process not just the before and after. Thanks for creating this channel to the restoration of real quality.

    It would have been SO easy to just toss this in the trash and go to a harbor freight store for some crappy piece of low quality steel item that would fail after three uses.

    Instead you took the time to restore and return to glory an real piece of craftsmanship from years gone by. I was right there with you as I saw the road blocks to the resto, and thought how I would solve them and compare notes.

  11. Alles, was man braucht ist ein 10.000 € Maschinenpark und schon kann man einen Schraubstock für 80,- restaurieren. 🙂 Coole Arbeit. Hätte ich auch gerne alles am Start.

  12. Ich werde sehr beeindruckt von dir sein, wie du mit all diesen Ps erfolgreich sein kannst, die du am besten auf youtube findest

  13. Wieso hast du nachgeprüft ob der Stahl wärmebehandelt wurde? kann man einen solch behandelten nicht schwarz einlassen?

    Und.. was nimmst du zum einfetten?

  14. Also ich würde mit diesem Schraubstock keine Minute arbeiten…!
    Dafür ist er einfach viel zu wertvoll (: *
    Ziehe hier ganz ganz tief den Hut vor dieser
    exzellenten MEISTER ARBEIT ! 👍👌👍👌

  15. такая работа вызывает уважение.молодец.а вот покраска надписей – лишнее.

  16. Надо было в кока-коле замочить тиски ржавчина бы сразу отвалилась и они были бы как новые 😄

  17. Das war Wunderbar! Sehr gut gemacht!
    Big& Fat thumbs up: you ahve just earned yourself a new subscriber from Montreal!

  18. Execllent work and a VERY nice vice.

    Did you consider using electrolysis to remove the rust?

    You said that you weren't a fan of the rough edge on the jaw face. You could have reversed the face and saved the price of the new ones.

    Just suggestions.

  19. Красноярск.прекраснуй труд и результат.руки откуда надо растут.уважение .

  20. а как работать с такими?) я бы на полочку поставил)

  21. Красиво, но я бы покрасила в другой цвет и буквы не выделяла белым. И вообще зачем у меня этот видосик в рекомендациях , я даже не знаю для чего эта штукенция предназначена

  22. 저는 당신의 꼼꼼함, 섬세함, 작은 부분 까지 놓치지 않고 신경쓰시는 부분이 제일 마음에 들어요 ~ !

Leave a Reply

Your email address will not be published. Required fields are marked *