Toyota How-To: Headlight & Marker Lights | Toyota

Toyota How-To: Headlight & Marker Lights | Toyota


– {Narrator] The headlight
controls are located on the left side of the steering wheel. To operate the headlights
rotate the end of the stalk. Rotating it back or down one setting will turn off the daytime running lights. Rotating it forward or up
to the first position, auto, sets the daytime running
lights, parking lights, the headlights, tail lights,
license plate lights, and instrument panel lights to come on automatically when it’s dark, and turn off when it’s light. The auto headlight sensor is located in the middle of the
dash near the windshield. Do not place anything over the sensor to ensure the system’s functionality. Rotating the stalk to the second position turns on all lights,
except the headlights. And the third position
turns on the headlights and all other lights, except
the daytime running lights. With the headlights on
pushing the stalk forward will turn on the high beams. A high beam indicator will illuminate in the instrument panel. Pulling it back to the center position will turn the high beams off. Pulling the stalk towards you
will flash the headlights. You can flash the high beams whether the headlights are on or off. If your vehicle is equipped
with automatic high beams, you can activate them by moving the stalk to the auto position and
pushing the stalk forward, like you would for
turning on the high beams. When the high beams turn on, an LED will illuminate
in the instrument panel to notify you that the system is active. Automatic high beams come
in handy on dark roads. If the system senses
another vehicle approaching or if you’re approaching
another vehicle from behind, it’ll automatically
switch to the low beams. After the system senses
the vehicle has passed or the distance between
the two vehicles increases, it’ll automatically revert
back to the high beams. To disable this feature, simply
pull the stalk towards you and switch to low beams.


29 thoughts on “Toyota How-To: Headlight & Marker Lights | Toyota

  1. Can we adjust the lights vertically.. means there is provision given in other cars that we can adjust lights from 0 to 4…

  2. Why didn’t you put hi and low LEDs on the 2018 Highlander Limited Platinum Hybrid like my much cheaper 2017 Prius’s? The HIDs are better than halogen but not much.

  3. how come on my rav4 the lights won’t turn on the strip light like the all day running lights ? can anyone tell me how to turn them on

  4. I use the automatic high beams when driving my 2018 Prius 4. So many other drivers think I am using the high beams and flash me when I drive past, lol. The regular headlights are so bright!

  5. Thank you but your ad lasts too long and I was listening to Elvis but your ad took over his music and I had to go back and find Elvis again. You should put those ads on TV so most people will see it, bcuz it's a very important commercial for everyone who drives, even if they drive a different vehicle. It also proves that not everything with artificial intelligence works properly all the time.

Leave a Reply

Your email address will not be published. Required fields are marked *